If you have a laminate wood floor, it is time to shine! These floors are both durable and low maintenance, but they can get dirty over time. In this blog post, we will show you the best way to clean and shine laminate wood floors so that they look like new again!
- 1 Best Way to Clean and Shine Laminate Wood Floors
- 2 How to Maintain the Shine on Laminate Wood Floors
- 3 Frequently Asked Questions
- 4 Final Words
Best Way to Clean and Shine Laminate Wood Floors
When it comes to laminate flooring, the best way to keep things looking flawlessly shiny is with proper maintenance. But fine dust and debris can accumulate on a laminate floor over time, diminishing its quality.
The secret for restoring shine back into your flooring? Proper cleaner types are key! If you’ve been using unfriendly products as well (such as ammonia), stop immediately – these may undo all of that hard work when trying to restore a beautiful look in no time flat!
Step 1: Remove dust from the floor
Dust removal is a necessary part of any home. It can even be the difference between a clean or dirty floor! Not only does it remove dirt, but also dust and temporary grime that has built up over time.
Regular sweeping to prevent build-up on your laminate floors will ensure they are in top condition for years to come – shiny and new like when you first installed them!
You can also vacuum the floor with a hard-floor attachment and avoid scratching its finish by using an appropriate brush on your vacuuming apparatus. Avoid abrasive cloths such as towels that are too rough for delicate surfaces like laminates which will be scratched instead of polished when you use them!
When it comes to shining up the laminate floor, a soft, lint-free microfiber cloth is the best. Avoid steel wool or scrubbing sponges when cleaning your floors and always clean under furnitures and along the walls since hair and dirt can easily slide across surfaces that are not dusted regularly.
The consequence of only dusting visible areas is you may end up sweeping again because trash will move out from its hiding places after slight changes in air currents which cause debris on the ground where you just walked by!
Step 2: Use the right cleaner
The right floor cleaner can make a world of difference. Make sure to use the proper cleaning agents for laminate floors, or try your hand at making one yourself!
There are many ways to make your laminate floor shine. The best way for me is with a vinegar and water solution, which I find inexpensive as well as effective.
Just mix white vinegar in equal parts of warm water then put the mixture into a spray bottle; you’re all set! If this doesn’t sound like something that would work for you, another option is using Bona Cleaner – just be sure not to buy their polish or refresher because these could potentially harm the laminate wood floor by leaving shiny residues.
Also, it’s important to stay away from any cleaners with oils and soaps because they can dull your laminate floor. Instead of using a product like that, use something specifically designed for shining laminate floors or simply mix water and vinegar together – we all have those things lying around!
If you want to make the process of cleaning your floors so much easier, all it takes is adding a few drops of rubbing alcohol. This will help get rid of pesky shoe polish and nail polish without having to scrub or use harsh chemicals that could potentially damage your beautiful laminate flooring in any way! A good ratio for this job requires equal parts of vinegar, water and rubbing alcohol.
Step 3: Spray the cleaner directly onto the laminate
Never spray too much at a time when cleaning laminate wood floors. Spraying more than you need makes it difficult to clean up any drips and can also warp the material.
Additionally, this makes it easy for you to clean the whole area without walking on the wet and slippery floor.
The smell of vinegar will only last ten minutes or less so don’t worry about that.
Step 4: Wipe with a microfiber mop
Clean your floor in sections by working with the grain. Wring out a microfiber mop before using it, and never use string mops on laminate because they hold too much water which can damage the surface.
Your floor should look moderately damp after you clean it without streaks left behind from excess soap or dirty water residue. Spray the cleaner over each section of floors until they are completely clean so that there is no problem when adding new layers of products to them later down the line; this will also help keep these surfaces looking fresh for longer periods than usual as if they were just being installed today!
Step 5: Dry the floor
Allow the floor to air dry, or use a microfiber cloth to wipe the floor dry using circular motions. This will buff and bring out its luster while removing any dirt or liquid from it as well! Allow the floor to dry before walking across it for safety reasons, though.
How to Maintain the Shine on Laminate Wood Floors
Knowing how to maintain the shine on laminate wood floors is a very important step in keeping the floor looking good and lasting longer. Here are the four things you need to do in order for your laminate flooring to keep shining:
- Vacuum your floors regularly to remove any dust or dirt.
- Mop your floors with a microfiber mop and a cleaner that is safe for laminate wood floors at least once a week.
- Remove any spills as soon as they happen by blotting them up with a clean, dry cloth.
- Use coasters under drinks and glasses to prevent stains from being left on the floor.
Frequently Asked Questions
What to do when laminate floors are dull and streaky?
If you use the wrong cleaning solution on a laminate floor, it can cause streaks and leave a haze. To clean and restore the shine of your laminate wood floors, do the following:
- Clean the floor with a damp mop or cloth.
- Scrub away any stains and spills with a cleaner designed for laminate floors.
- Buff the floor with a microfiber cloth to bring back its shine.
What is the best product to shine laminate wood floors?
There are many products that work well on laminate wood floors.
Try this DIY laminate floor polish that will not only bring back the shine but can help with scuffs and protect the finish:
- Pour 2 cups of warm water, 1 tablespoon of white vinegar, and 2 tablespoons of vegetable oil into a squirt bottle and shake well.
- Begin at one corner of your room then spray the solution as you go so it doesn’t pool too much in any place or make an area greasy looking.
- Rub into the floor using a microfiber cloth in a circular motion until done – floors will be clean again!
If you prefer a ready-made option, the best product to shine laminate wood floors is Rejuvenate All Floor Cleaner.
It’s safe for use on a variety of surfaces, like laminate floors that can get dull and scratched when you clean them with conventional polishes. The pH-balanced formula leaves behind no residue after it dries while giving off an extra shine thanks to its Shine Booster technology.
Your floors are a reflection of how you feel. Give them the attention they deserve with this fool-proof floor care regimen!
It may be easy to neglect your carpets and laminate wood floors when it comes time for cleaning, but there is no excuse these days thanks to modern technology that lets us easily maintain our spaces clean as well as germ-free – all without using harmful chemicals or toxic products like before.