Is there anything better than Bissell Crosswave? The Bissell Crosswave is an excellent product, but its performance comes at a price. A cheaper alternative is the Hoover Floormate. Both models can be used for vacuuming and mopping. They have a similar design and performed well in our cleaning tests.

Is Hoover FloorMate discontinued? Hoover Floormate Deluxe FH40160 has been discontinued. See all Hoover Steam Mops & Hard Floor Cleaners.

Does the Bissell Crosswave leaving streaks? You might not be using enough fresh cleaning solution when cleaning. Make sure to hold the trigger to leave an even finish on your floor. Streaking can also occur if you use too much water during passes. After making wet passes, release the trigger to go over the wet area without spraying.

Is the Bissell Crosswave better than a mop? Stuck On Dirt – As I said, I think the Bissell Crosswave 1785 mop actually picks up and cleans better than my steam mop. The only exception is for really stuck on dirt or spills.


How do you clean red lint brushes?

Is there anything better than Bissell Crosswave? – Additional Questions

What is the best VacMop on the market?

Here are our picks for the best vacuum mops out there:
  • Best overall: Bissell CrossWave X7 Cordless Pet Pro.
  • Best reviewed on Amazon: Bissell CrossWave.
  • Best value: Shark VacMop Pro.
  • Best upright: Tineco Floor One S3.
  • Best splurge: Roborock S7+
  • Best cordless: Bissell CrossWave Cordless Max.

Does the Bissell CrossWave leave floors wet?

The CrossWave® Cordless uses its spray function to wet the floor for cleaning. If it seems like there is too much water on the surface, here are a few tips to prevent that. Make sure you don’t prime the system for cleaning for longer than 10 seconds.

Does the Bissell CrossWave vacuum and mop at the same time?

No need to vacuum and then mop. CrossWave® multi-surface cleaner vacuums and washes floors at the same time, picking up wet and dry debris.

Are vacuum mop combos worth it?

In relative terms, vac-mop combos work much better than a wet Swiffer or robot mop (or other pad-style cleaner). But they are not quite as effective or versatile as a traditional wet mop (when used properly); for example, combos don’t clean grout lines as well as traditional mops do.

What is the difference between the CrossWave and the CrossWave Max?

It comes with a self-cleaning cycle which flushes out dirt, hair and debris after each use. The Max model has a bigger capacity and brush roll than the Pet and Cordless model.

Can you use the Bissell CrossWave as just a vacuum?

A: Hi Val – the CrossWave isn’t intended to be used as a dry vacuum. It will vacuum and wash your hard floors and area rug at the same time. So for best results, it should always be used with water and BISSELL CrossWave Formula.

Can I use vinegar and water in my Bissell CrossWave?

Yes, you can add other multi-surface cleaners or vinegar except it is recommended that during your warranty period to use the Bissel multi-surface cleaner to not void the warranty.

Can I use Fabuloso in my CrossWave?

A: I have used Fabuloso for the last 2 1/2 yrs. Fill the canister to a level half way between the fill marks. Then add Fabuloso to top line. Works great on tile floors.

Why is my Bissell CrossWave leaving dirty water?

If machine is leaking from the side vents:

Do Steam Cleaners Actually Steam?

There may be too much foam building up within – be sure to use the recommended amount of formula as indicated on the clean tank. Also be sure to use the proper CrossWave formula (not portable or upright cleaning formulas)

Can I use the Bissell CrossWave on laminate flooring?

And the best part is, if you have a CrossWave®, you can vacuum and wash your laminate floors and area rugs all at the same time!

Does the Bissell CrossWave vacuum carpet?

The Bissell Crosswave does work on carpet. It’s perfectly safe and great for small touchups and quick cleans. However, it doesn’t work as a traditional vacuum – so it may not be as effective as you’d expect. Keep reading, and we’ll explain precisely why it isn’t like other vacuums.

Can I use Bissell Crosswave on vinyl plank flooring?

The Bissell Crosswave is safe for a variety of surfaces. This includes tile, sealed wood, laminate, vinyl, and linoleum. It is also safe to use on carpet and area rugs.

How often should I clean my Bissell Crosswave?

The Crosswave by Bissell is a great home vacuum and mop combination that can tackle any type of mess, wet or dry. Keeping an upkeep schedule and replacing the filter and brush every four and six months, respectively, will make your Crosswave last long and clean as effectively as day one.

Is the CrossWave a steam mop?

The Bissell Crosswave is not a steam mop– it’s a roller mop. When you turn it on, you pick one of two settings- rug, or hard floor. To mop, you have to push the button in the handle that dispenses water and cleaner.

Do I need to sweep before using Bissell CrossWave?

Forget sweeping your floors before you mop. CrossWave® and BISSELL® CrossWave® Pet Pro combine the chores into one machine, so you don’t have to spend so much time cleaning.

Do you hold trigger on Bissell CrossWave?

Before each clean, hold the trigger for 10 seconds to prime the system. Switch to area rug mode to increase the flow of your CrossWave®. Using short passes while holding down the trigger, the multi-surface brush roll will go to work.

Do you hold the trigger the whole time on the Bissell CrossWave?

When you’re ready to clean, hold the trigger on both the forward and backward pass for great cleaning results. ›› To dry floors faster, release the trigger and run the machine over the floor without dispensing solution.

Can you use any solution in Bissell CrossWave?

Alternative Cleaning Formulas. Once again, the company does not recommend using anything other than their official Bissell cleaners. While you’ll void the warranty if you use anything else in your Crosswave, many people do prefer their homemade cleaners.

Does the Bissell CrossWave shampoo area rugs?

Your CrossWave® Cordless Max works to vacuum and wash hard floors and area rugs. In this video, we’ll show you how to use your CrossWave® to clean area rugs. Before you begin cleaning your area rug, be sure that the brush rolls are free of excess dirt, mud, or sticky messes.

Can you use Bissell CrossWave on ceramic tile?

Mopping. Next up, the Bissell Crosswave can be used to mop hard floor surface types, such as tile or hardwoods, in addition to washing area rugs.

Does crosswave clean grout?

It won’t make your grout sparkling white, but I have noticed that I haven’t had to hands and knees scrub it nearly as much since I have been using the Crosswave. I think that has more to do with the dirty water getting sucked up instead of getting left in the grout to dry into a dark line.

Similar Posts