Is it easy to replace a toilet seat? Installing or replacing a toilet seat is a fairly straightforward job. Whether you’re replacing your loo seat because it’s old, damaged or you want a new style; all you’ll need are some basic tools.

How do you remove an old toilet seat and install a new one? 

  1. Open the Bolt Housing. Many new toilet seats are attached to the toilet bowl with two plastic bolts and nuts.
  2. Use a Basin Wrench for Tight Spaces. If you have a tight space to work in, you may need a basin wrench (tool on the far right).
  3. Remove the Toilet Seat.
  4. Removing Older Toilet Seats.
  5. Attach the New Seat.

How do you replace a hidden bolt on a toilet seat? 

Do all toilet seats fit all toilets? Do all toilet seats fit the same? The simple answer is no, there are a range of different toilet seat fittings. Some are bottom fixing (fitted from beneath the fixing holes) and some are top fixing (usually required when there isn’t access to the bottom of the pan, e.g. with a fully shrouded toilet).

Contents

What Are Hem Styles?
READ

Is it easy to replace a toilet seat? – Additional Questions

How do I know which toilet seat will fit my toilet?

How do I know what size toilet seat I need?

Measure the width of the bowl at its widest point. Measure the length of the bowl from between the seat bolts to the outer edge of the front of the bowl. Round bowls should have a length of about 16 1/2 inches and elongated bowls should be 18 to 18 1/2 inches.

Are toilet seats universal in size?

As we said, toilet seats come in two sizes: round and elongated. Every toilet seat is one of these two, indicated on its packaging. Using a tape measure, determine the distance between the center of the mounting holes in the back of the toilet.

Can you put a round toilet seat on an elongated toilet?

Elongated bidet seats and round versions share the same rear end where all the internal components are stored. The only difference is found in the length of the actual seat and lid portion. This means that either size bidet seat will be able to mount on either size toilet.

What are common toilet seat sizes?

Typical width: 14″ – 14-1/2″ Typical round length: 16″ – 17″ Typical elongated/extended length: 18″ – 19″

Are elongated toilet seats all the same size?

Elongated toilet seats measure about 18.5 inches long and about 14 inches wide. Elongated toilet seats are preferred by many, especially men, because of their extended size. Because of its popularity, this is the seat that is standard in most large businesses such as hotels, gas stations, and airports.

Are wood or plastic toilet seats better?

Wood toilet seats stay warmer and are more comfortable, but can be hard to clean. Plastic toilet seats are easier to keep clean and are more versatile, but can be uncomfortable, especially in the winter.

How do you tell if your toilet is elongated or round?

Toilet seats are sold by shape (not by length).

You should, however, get exact measurements if you have a custom or non-standard toilet. If the length is between 18-19.5 inches, you have an elongated toilet bowl seat. If the length is between 17-17.75 inches, you have a round toilet bowl seat.

How Do I Stop My Bed From Shaking?
READ

Why are elongated toilets better?

Elongated bowls are also considered more ‘hygienic’ in that the larger surface area of the bowl makes is easier for men and children to use with less mess. The longer bowl size is also a requirement for ADA use, and the longer/wider bowl is generally easier to use for those with mobility issues.

How often should a toilet be replaced?

Most plumbers agree that an average toilet can last around 50 years. However, this is only when the toilet is well maintained and gently used. If it was improperly installed or frequently misused, it may not last as long.

What is chair height vs comfort height toilets?

Without the toilet seat, comfort height measures anywhere between 16 and 18 inches, whereas when the seat height is included, the measurement ranges from 17 to 19 inches. Keep in mind that standard height measures anywhere between 14 and 15 inches without the seat and 15 to 16 inches when the toilet seat is included.

Which toilet height is best?

Toilet Height

Standard-height rims are 14- to 15-inches from the floor and should work well for shorter people. If you’re taller, consider chair height toilets that have a toilet seat height of 17-inches or more.

What toilet height is best for seniors?

What is the Proper Toilet Seat Height for Seniors? The Americans with Disabilities Act (ADA) indicates that toilets must be between 17 and 19 inches from the floor, including the seat. It should be high enough so that sitting and standing are not excessively difficult. Both feet should rest flat on the floor.

Can a toilet be too tall?

The ideal height for your toilet will depend on three things. Standard toilets are usually around 15 inches high at the seat. If you are a tall person, that could be too low for you. You might want to check into a floor-mounted “comfort height” toilet that is 17 to 19 inches in height or elevated toilet seats.

What is better a 1 piece or 2 piece toilet?

One piece toilets are typically heavier and easier to clean, and there’s less space for bacteria to grow. Because two piece toilets feature a detachable tank, they’re more customizable for preferred styles and heights. Both styles can include bells and whistles like bidet attachments or low-flow energy saving.

Should you caulk toilet base?

Caulk Keeps the Toilet Secure

How do I remove tea stains from a plastic pitcher?
READ

Think again! Caulk keeps your toilet secure the floor, and avoids any chance of injury or toilet malfunctioning. It’s actually required by the International Plumbing Code to caulk a toilet to the floor, and now knowing the reasoning behind it, why would you not want to?

Are there any disadvantages to a one-piece toilet?

One-piece toilets are considerably heavier. This is because a two-piece can be uncoupled to move, halving its weight, while a one-piece contains everything in one mold. Moving it can be more difficult, and shipping costs may be considerably higher.

How long does a porcelain toilet last?

Given the right conditions, porcelain toilets should last between 15 to 30 years and can even last up to 50 years. Some people might even say the lifespan is indefinite. Most toilet bowls and tanks are made of porcelain, and have been for a LONG time.

Should I replace a 20 year old toilet?

For most toilets, a 20-year lifespan is the outer limit. A toilet may continue to work after this, but it will be at a higher risk of starting to leak and suffering from numerous clogs and other repair issues. Get ahead of the problem and replace a toilet that’s 20 years or older.

Are old toilets better than new ones?

Should I Replace My Old Toilet? While your old toilets may technically do their job, they’re simply not as efficient as newer models. Not to mention if your old toilets start to show their age by cracking, leaking, or clogging, it’s often best to consider replacement rather than repair.

How do I tell how old my toilet is?

Manufacturers often stamp the date when your toilet was made on the inside of the tank lid. By carefully lifting the lid off the tank and flipping it over, you should be able to determine how old your toilet is. Sometimes the stamp is found on the tank itself just above the water line.

Similar Posts