Can you put a stackable washer and dryer in a closet? Yes, a stackable washer and dryer can fit in a closet. These appliances will take up at least 2×2 feet of space on the floor. However, there must be sufficient space on the sides and the back for electrical, water, and ventilation hose connections.

How do you install a washer dryer combo in a closet? 

How do you put a stackable washer dryer in tight space? 

How much closet space is needed for a stackable washer and dryer? Stacked washer and dryer dimensions

Additionally, be mindful to allow for at least six inches of clearance between the appliance and the rear wall for proper ventilation. If you are stacking in a closet, account for at least one inch of space between each side of the appliance and the wall.


Is Bed In Corner Good?

Can you put a stackable washer and dryer in a closet? – Additional Questions

Are stackable washer dryers worth it?

Perhaps one of the most obvious benefits to a stackable washer and dryer (and probably the main reason you’re interested in them) is the opportunity to have your laundry machines take up less space. Because they’re meant to be stacked in such a way, you don’t need much square footage in order to fit them in.

How high is the dryer vent on a stackable washer and dryer?

1-2 of 2 Answers

It ranges from about 41.5 inches to 45.5 inches, give or take a quarter of an inch.

How big does a closet have to be to fit a washer and dryer?

Minimum space is 40 inches deep and 32 inches wide for a washer and dryer. A side-by-side washer and dryer needs at least 40 and 56 inches of space.

How big does laundry closet need to be?

A narrow laundry closet should be at least 32 in. wide to allow for hoses (when the supply is located to the side) and machine vibration, and 40 to 50 in. deep (about twice the depth of a standard closet).

How much space do you need behind washer dryer?

You want to be sure the doors will clear any walls or door jambs. Behind: Add in about 6 inches for venting space and hoses. On the sides: Help minimize noise by leaving about 1 inch of space on each side of your washer and dryer.

What is the standard size of a stackable washer and dryer?

Most stacked washer dryers come in the standard 27-inch width size that’s the same as a standalone washer or dryer, but there are also 28-inch options, as well as slimmer 24-inch models. Typically, these units fall between 74-½” tall up to 79” in height, and 26 to 33 inches in depth.

What is needed for stackable washer and dryer?

What Is Needed For A Stackable Washer And Dryer? Generally, you can put a stackable washer and dryer anywhere in your home or apartment. The only condition is that they must have access to three things: power supply, water supply, and venting hose.

How do you stack a washer and dryer without a kit?

How far should a washer and dryer be from the wall?

It’s ideal to have around six inches of space behind your washer and dryer. A periscope dryer vent can save space behind the dryer. The dryer is able to sit closer to the wall because of this.

How do you turn a closet into a laundry room?

How to Convert a Closet into a Laundry Room
  1. Measure the inside dimensions. Before you do anything else, you should make sure the washer and dryer will fit inside the space.
  2. Empty the closet out completely.
  3. Protect the floor from possible leaks.
  4. Install the water and drain lines.
  5. Install the proper size power outlet.
What Are Bed Accessories?

Can the back of a dryer touch the wall?

According to the installation manual, 5″ is recommend, but 0″ is allowed. Show activity on this post. The minimum recommended distance is one inch: Additional spacing of 1″ (25 mm) on all sides of the dryer is recommended to reduce noise transfer.

Is it better to vent a dryer up or down?

It’s fine for the dryer vent to rise vertically to enter the building ceiling, but within the ceiling the vent should slope downwards towards its exit point at the building exterior wall.

What happens if you can’t vent your dryer outside?

Improper venting of a dryer typically results in moisture being deposited in various areas of the room. Moist air serves as a breeding ground for mold-and-mildew when it condenses on different surfaces. You want to exhaust the warm air outside the home rather than indoors to properly vent your dryer.

How can I vent my dryer without outside access?

  1. Install An Indoor Dryer Lint Trap. Probably the most common way to vent a dryer without a vent to the outside is to use an indoor dryer lint trap.
  2. Vent It To A Window. The second way to vent a dryer without outside access is to just use a window if available.
  3. Install A Ventless Dryer.

Does a stackable dryer need a vent?

Stackable washers and dryers typically still need a vent. While they are compact and save space, most are still designed to vent to the outside. If you live someplace where venting just isn’t possible, like an apartment, don’t give up yet.

Can I put a ventless dryer in a closet?

Ventless models can fit under a counter or even in a closet, provided there is proper airflow and an electric socket. If you do use your dryer in a closet, you will need to open the doors while you’re drying to maintain air circulation.

Is it safe to have a dryer vent indoors?

If you are venting your dryer into your home, you need to stop doing so. Indoor dryer vents are not safe. They can cause health problems due to a build-up of mold and structural damage due to the increased humidity. They can also be a fire hazard as the lint they spew into the air is highly flammable.

Do electric dryers have to be vented outside?

Every electric dryer has to have an outlet through which it expels warm, moist air, or it won’t work. The air is usually loaded with lint, and if you don’t vent it outside, it can cause all kinds of problems. The moisture can rot framing and promote mold growth, and the lint can catch fire.

How do you vent a stackable dryer?

Can a dryer vent cause mold?

A clean and properly installed dryer vent is critical to ensuring that water is fully expelled outdoors during the dry cycle. If the moisture isn’t escaping through the dryer vent for any reason, it can cause mold growth in the home or business.

Can mold survive the dryer?

Moist heat from the dryer can keep humidity levels high, which creates ripe conditions for mold to grow. Leave a window open or turn on a fan when the dryer is running, and check dryer hoses. “If the vent to the outside comes loose, moisture can get trapped in the wall, and mold can grow,” says Weitz.

Similar Posts